How do I install Lexmark printer software?
Go to http://support.lexmark.com, and then select your printer and operating system.
- Run the installer, and then follow the instructions on the computer screen.
- For Macintosh users, add the printer. Note: Obtain the printer IP address from the TCP/IP section in the Network/Ports menu.
How do I add a Lexmark printer to Windows 10?
Open Printers & scanners, and then click Add a printer or scanner. Depending on your printer connection, do one of the following: Select a printer from the list, and then click Add device. Click Show Wi‑Fi Direct printers, select a printer, and then click Add device.
How do I scan from my Lexmark printer to my computer?
Setting up Scan to Computer
- Open the printers folder, and then select your printer. Note: If your printer is not in the list, then add your printer.
- Open the printer properties, and then adjust the settings as necessary.
- From the control panel, touch Scan to Computer > select the appropriate scan setting > Send It.
How do I connect Lexmark printer to WIFI?
Using the control panel
- From the control panel, navigate to: Settings > > Network/Ports > > Wireless > > Setup On Printer Panel > > Choose Network >
- Select a Wi‑Fi network, and then type the network password. Note: For Wi‑Fi‑network‑ready printer models, a prompt to set up the Wi‑Fi network appears during initial setup.
How do I Scan and email on my Lexmark printer?
- Open the printer’s web page and Sign in as Administrator.
- On the menu select Settings.
- Select E-mail.
- Select E-mail Setup. In Primary SMTP Gateway type the value you obtained in step 5. Example: acme-com.mail.protection.outlook.com. In Primary SMTP Gateway Port leave the value at 25. In Use SSL/TLS select Negotiate.
How do I set up my printer to Scan to my computer?
Add a printer or scanner
- Select the Start button, then select Settings > Devices > Printers & scanners > Add a printer or scanner.
- Wait for it to find nearby printers, then choose the one you want to use, and select Add device.