How do I find my Grandstream IP address?

How do I find my Grandstream IP address?

Connect a computer directly to the LAN port on the Grandstream. Open a browser window on that computer and Navigate to http://192.168.2.1. Log in with the default password 123. The WAN IP Address will be displayed on the Status screen.

How do I setup my Grandstream GXP1405?

Provisioning a SIP account on the Grandstream GXP1405 was quick and easy….Enter in your SIP account credentials as follows:

1. Account Name = Your Choice.
2. SIP Server = Proxy/Domain.
3. Outbound Proxy = sip.onsip.com.
4. SIP User ID = Username.
5. Authenticate ID = Auth Username.
6. Authenticate Password = SIP Password.
7. Name = Your Choice.

How do I enable direct IP calls on my Grandstream?

In the Advanced Settings page there is an option “Use Quick IP-call mode”, by default it is set to No. When this option is set to YES, and #XXX is dialed, where X is 0-9 and XXX <=255, phone will make direct IP call to aaa. bbb. ccc.

How do I find the IP address of my Grandstream gxp2130?

Connect the phone to a LAN port. The phone should obtain a valid IP Address (DHCP enabled by default). You can find the IP Address by navigating the phone menu and note it down.

How do I setup my grand VoIP phone?

Guide: How to Set Up a Grandstream GXP2160

1. Step 1: Get the IP of the phone. While you can setup everything through the display on the phone, it is a lot easier to manage through your web browser.
2. Step 2: Log on to the phone’s web interface.
3. Step 3: Set up your account.
4. Step 4: Enter Network Settings.
5. Step 5: Set Presence.

What means IP phone?

Internet Protocol phone
(Internet Protocol phone) A telephone that is used with voice over IP (VoIP) telephone services. The IP phone plugs directly into the Internet and converts voice into IP packets and vice versa. It has built-in SIP signaling and is used in conjunction with an IP PBX in an enterprise or a hosted VoIP service.

How do I reset my Grandstream IP phone password?

You need to type in ‘admin’ as the password to enter Advanced Settings and other Account settings page. That is the password by default. If you forget or lose your own custom password, you will need to Factory Reset the device, login using ‘admin’ and then reconfigure completely.

How do I reprogram my Grandstream phone?

Hardware Configuration – Factory Reset – Grandstream

1. Press the menu button (center button of the directional pad).
2. Scroll down and select ‘System’.
3. Scroll down and select ‘Factory Reset’.
4. Press ‘OK’ to confirm factory reset.
5. Press ‘OK’ to confirm to continue.
6. Your phone will reboot.

How do I make a direct IP call?

You can dial an IP address directly from the phones keyboard. Simply dial e.g. 192*168*10*17 to call the endpoint at 192.168. 10.17.

What IP address is?

Here’s how to find the IP address on the Android phone: Go to your phone’s settings. Select “About device.” Tap on “Status.” Here you can find information about your device, including the IP address.

How do I factory reset my gxp2130?

Press the MENU button. Once you are in the phone’s menu, scroll using the Left arrow key (4Times) until you get to System. Once the System Menu is highlighted press the MENU button. From there, you will then use your Down arrow key to select Operations – Factory Reset.

How do I setup my grand VOIP phone?