What is the backset size on a lock?
The backset is the horizontal distance from the edge of a door to the centre of a lockset; thus, the distance a lockset is ‘set back’ from the edge of a door is called its backset. It’s usually 1 inches or 2 inches (or 44mm and 57mm).
What does backset mean with locks?
The backset is the distance from the edge of the door to the spindle mechanism on the latch. Usually a 63mm case measurement will have a 44mm backset and a 76mm case measurement will have a 65mm backset. The backset you choose is where your door knobs will sit on the door (where the spindle goes through).
What is the most common backset?
2 3/8″
Standard backsets are either a 2 3/8″ backset, or 2 3/4″ backset. The most common backset is 2 3/8″ but 2 3/4″ is also quite common – usually used on exterior doors. Sometimes it’s easier to measure from the edge of the door to the highest point on the bore hole.
What is backset Mortise?
Backset of existing hole(s), measure from the edge of the door to the center of the hole, usually either 2 3/8″ or 2 3/4″ (see B on diagream at right) Measure from center of top hole to center of bottom hole (only if two holes are drilled)
What size backset do I need?
Overall Latch Size = Backset An easy way to choose which latch you need is to measure from the edge of your door to the centre of your door Stile. Choose the Backset which is closest to this measurement, and the handle will be as central as possible to the Stile on your door.
How do you measure the backset on a door lock?
To determine the backset on your door, measure the distance from the outer edge of the door, to the center, or highest point of the bore hole. If there is existing door hardware measure from the edge of the door to the center of the knob’s backplate.
What is standard door backset?
2 3/8 inches
The backset is the distance from the edge of the door to the center of the 2-1/8-inch bore hole. In the United States, there are two common backsets for residential door locks: 2 3/8 inches and 2 3/4 inches. Pack your locks with a 2-3/8-inch or 2-3/4-inch latch, depending on which backset you specify.
How do I know what size lock I need?
You can work out the size of the lock by measuring the distance from the edge of the door to the centre of the door handle or knob. This measurement will give you the approximate size of the backset which will allow you to identify which size lock or latch you have.
What is standard backset for door knobs?
The backset is the distance from the edge of the door to the center of the 2-1/8-inch bore hole. In the United States, there are two common backsets for residential door locks: 2 3/8 inches and 2 3/4 inches. Pack your locks with a 2-3/8-inch or 2-3/4-inch latch, depending on which backset you specify.