What type of adhesive is Stormsure?
Stormsure Flexible Repair Adhesive is a very strong general purpose adhesive and it can also be used as a surface sealant. It exhibits special characteristics unlike many adhesives as it is highly flexible and stretchy after it has cured but it remains very strong.
How long does Stormsure take to dry?
Stormsure Flexible Repair Adhesive is an extremely versatile, waterproof adhesive that comes in two colour variants of clear and black. It is a slow-curing adhesive which takes about 12 hours to fully set, meaning you have plenty of time to perfect your repair.
How do you use a Stormsure trampoline?
Use the adhesive at room temperature. Clean the damaged area to remove dirt and grease (sandpaper the surface for best adhesion). Apply a generous amount of Stormsure Flexible Repair Adhesive to the damaged area, with at least a 5mm extra around the damaged area. Leave horizontal and allow to cure for 10-12 hours.
How do you use Stormsure flexible adhesive?
Apply a generous amount of Stormsure Flexible Repair Adhesive to the damaged area, with at least a 5mm extra around the damaged area. Leave horizontal and allow to cure for 10-12 hours. TIPS: Store partly-used tubes in a deep freezer. Warm up to room temperature before use again.
Can you fix a trampoline tear?
A good quality trampoline can give year-round service for the family. But, if there is a hole or tear on the mat, jumping on it will be devastating. Fortunately, the matter of relief is that hole in a trampoline mat can be repaired using a trampoline patching and repairing kit.
Can you fix a small hole in a trampoline?
Holes under 1 inch in diameter should be self-repaired, and holes larger than an inch should be taken to a trampoline professional for patching. If there is more than one hole, the trampoline mat should be replaced.
What is tuff tape?
TUFF Tape is made of a thin, but very tough, polyurethane film with a pressure sensitive adhesive and backing paper on the rear side. It has characteristics unlike many other tapes. It is waterproof and air tight. It is highly resistant to abrasion and very difficult to tear or puncture.
Can you repair cracked wellies?
You’ll basically making a patch with a durable, waterproof shoe glue that cures to a rubber seal. To ensure a good bond, use some sandpaper to rough up the repair area. Use your tape to mark off the area around the crack that you will be applying Aquaseal SR on.
Can you repair rubber wellies?
The most effective method for welly repair that we have found is by using ‘Stormsure’ (see our Accessories section). If you have split, torn or cut your wellies, if the sole is parting from the upper or even if you want to reconstruct your heels, Stormsure is the answer!