How do you calculate yardage for Ripplefold curtains?
A more precise way to figure widths needed is to take the rod width and divide by the carrier spacing. This equals the number of carriers needed. Multiply that number by 4.25 (space between snaps) for total number of inches needed. Add for joins and side hems, then divide by the width of your fabric.
How much fullness do you need for Ripplefold curtains?
80%
Desired fullness is 80%. Suggest a one-way draw system, with snap carriers and butt masters. Treatment will cover an area 120″ wide. Desired fullness is 80%.
How do you sew on Ripplefold tape?
At the machine, sew the tape to the header while it is flipped up so you are sewing through the header fabric only, sewing nearest the fold. Unfold the header so the seam allowance is visible and face up. Fold the tape down and sew the bottom row of stitches.
What is Ripplefold drapery?
WHAT ARE RIPPLEFOLD CURTAINS? Ripple fold style curtains are curtains that have a consistent s- curve rippling across the span of the track. The ripples are created by carriers corded together to create that consistent wave. These styles are seen often in hospitality installations as hotels and banquet rooms.
How is drapery fullness calculated?
When it comes to determining specific measurements, the standard fullness multiplier is 2x the size of the area you’re covering with the fabric. Essentially, you should use twice as much fabric as you’d use if it were a flat curtain. By doubling the width of a flat curtain, you achieve 100% fullness.
How do you measure back stack on curtains?
Round up to the nearest inch. For example, a 48-inch-wide window opening divided by 6 equals 8 inches for the rod extensions on each side of the window. If your curtain is a single panel that pulls back to one side or the other, divide the window width by 3 to calculate the stack back.
What is fullness ratio for curtains?
Fullness Ratio is the ratio of the width of the curtain before pleating to its finished width when pleated or gathered. The higher the fullness ratio the more gathered and heavier the curtains will be. We recommend a Fullness Ratio of 2.4 to 2.5 for a pencil pleat curtain.
What is the difference between pinch pleat and Ripplefold?
Ripplefold drapes are a choice for both residential and commercial spaces because of the minimal look they give, without any pleating. Pinch pleat drapes work well with heavier, formal fabrics because of the nature of the design and the need to help conceal the hooks used to hang them on.
Are pinch pleated drapes out of style?
Pinch Pleats: All you Need to Know! Yes, you may say they are traditional, but perfect pleats can never go out of style, no matter what. Pinch pleats are a much-preferred option to finish off the top of drapes and provide that extra light and privacy control you want.
How wide should curtains be for 70 inch window?
A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.