How do I unlock my Cisco phone 7942?

How do I unlock my Cisco phone 7942?

Cisco 7942

1. Press the Settings key.
2. Press 2 – Network.
3. Press **# to unlock the phone.
4. Press 7 – Admin Vlan (Virtual Local Area network) (Telephony Vlan)

How do I factory reset my Cisco 7942?

Performing the Factory Reset on Cisco 7942, 7962 IP Phones

1. Unplug the power cable from the phone and then plug it back in. The phone begins its power up cycle.
2. While the phone is powering up, and before the Speaker button flashes on and off, press and hold #.
3. Release # and press 123456789*0#.

How do I change the TFTP on a Cisco IP Phone 7942?

Information

1. Press the Settings button on the telephone.
2. Select Network Configuration from the menu that appears.
3. In the Network Configuration menu, scroll down to select the Alternate TFTP option.
4. If Alternate TFTP is set to No, go to step 5.
5. Press * * # and then set to Yes.
6. Scroll up to select the TFTP Server 1 option.

How do you transfer on a Cisco IP Phone 7942?

Cisco IP Phone 7942G: How To Transfer Calls

1. During the call, press the Trnsfer soft key. The call is placed on hold.
2. Dial the number to which you want to transfer the call.
3. Wait for the call to be answered. Speak to the transfer recipient.
4. If the transfer fails, press the Resume soft key to return to the original call.

How do I reset my Cisco desk phone?

Unplug the power cable from the phone, and then plug in the cable again: the phone begins its power up cycle. The Headset/Mute & Speaker buttons flash in sequence indicating you may enter the reset key sequence. Press 123456789*0# within 60 seconds after the Headset, Mute, and Speaker buttons begin to flash.

How do I unlock my Cisco IP phone?

1. Unlock Settings – *, *, #.

1. Go to the Settings page of the phone.
2. While in the settings page, press *, *, # (star, star, pound) about 1/2 second apart.
3. The phone will display “Settings Unlocked” and allow you to make changes.

How do I find my TFTP server IP address?

Right-click on a device in the network either from the network area.

1. Select the option TFTP Client. This will display the TFTP client dialog.
2. IPv4 or IPv6 address: Select the IPv4 option if the TFTP server is having IPv4 address or select the IPv6 address option if the TFTP server is having IPv6 address.

How do I reset my Cisco IP phone 8811?

Press and hold # and plug the phone back in. The light for the Headset button turns off after you press the 1 key. After you enter the key sequence, the Mute button lights. Do not power down the phone until it completes the factory reset process, and the main screen appears.