How do you apply Zep high traffic floor polish?
Pour polish into a clean bucket. Using a dry rayon string mop, apply 4 coats of finish. To achieve a thin, even coat, move the mop in a continuous figure-eight motion. Allow floor to dry completely between coats to prevent hazing and to ensure adhesion; approximately 30 minutes under normal conditions.
Can you use Zep High Traffic Floor polish on hardwood floors?
Answer: No. It’s not advisable to use on wood or laminate floors. We recommend the Zep Hardwood & Laminate Floor Refinisher.
Is ZEP floor polish a wax?
The formula can be used as a floor wax remover. ZEP Heavy-Duty Floor Stripper removes acrylic finishes from floors in preparation for waxing.
Is ZEP good for concrete floors?
Zep Neutral pH Floor Cleaner Concentrate is a great choice for sealed concrete floors as well as marble, granite, vinyl, and stone (do not use on wood floors).
How many coats does Zep sealer have?
It dries to a clear, hard finish in under 30 minutes. I did the recommended two coats.
How many coats of wax should you put on a floor?
Applying 1st Coat of Wax – Most wax finishes, like our Optimal Wet Look Floor Finish will cover approximately 2,000 square feet per gallon. Each finish is different, but most recommend 4 to 5 coats. For example, 1 gallon of Optimal would provide 5 coats on a 20′ x 20′ (400 ft²) room.
How long does it take for Zep floor polish to dry?
Apply 2 thin coats of the Zep Stain Resistant Floor Sealer and allow each coat to dry approximately 30-45 minutes.
How do you apply Zep Wet Look floor polish?
Apply 4 thin coats of Zep Commercial® Wet Look Floor Finish. Allow floor to dry between coats; approximately 30 minutes under normal conditions. Zep Commercial® Wet Look Floor Finish should be maintained by frequent dust mopping and daily damp mopping with Zep Commercial® Neutral Floor Cleaner. Keep floor dust free.
How do you apply Zep floor sealer?
To use, simply spray the soiled area and mop clean. This residue free floor cleaning formula will remove trapped dirt and stains leaving a streak free shine. For fast, easy and efficient cleaning, use the Stone, Tile and Laminate Cleaner with Rejuvenate Click n Clean Multi-Surface Spray Mop.
Does Zep remove oil from concrete?
Zep Driveway, Concrete & Masonry Cleaner is specially formulated to remove dirt, oil, and grease stains from concrete, brick, asphalt, and masonry.
How do you use Zep floor sealer?
For optimal results, Apply 1-2 thin applications of the Zep Stain Resistant Floor Sealer. Allow 30-45 minutes for drying. Allow the sealer to cure then apply 4 thin applications of the Zep High Traffic Floor Polish. I hope this helps!
How many square feet does Zep floor sealer cover?
1500 sq ft
Zep Stain-Resistant Floor Sealer provides floors with a clear gloss coating that protects against staining. It also increases the gloss of subsequently applied top coats on porous industrial floors. Use as a base coat for Zep Floor Finish. One gallon covers up to 1500 sq ft and dries in about 30 minutes.