What are work planes in Inventor?
In a part, a work plane is an infinite construction plane that is parametrically attached to a feature. In an assembly, a work plane is constrained relative to an existing component. Use work planes when creating axes, sketch planes, termination planes, or to position cross-sectional views or cutting planes.
What is a work plane?
A work plane is a virtual 2-dimensional surface used as the origin for a view or for sketching elements. Work Plane Set or Show or Viewer. on the Architecture, Structure, or Systems tab in projects.
How do I create a new Workplane?
To create a new workplane,
- Click Home and then, in the New group, click the arrow next to Workplane.
- Click New.
- Type a Name for the workplane.
- Click Model Name and type a name.
- Click Owner and select the workplane’s owner.
- Select a method to position the workplane.
- Click OK to complete the operation.
What tool is used to assist in the positioning of work planes?
The Set Working Plane tool is in the 3D Modeling tool set. The Set Working Plane tool can set the location and angle of the working plane. Set the working plane to any location in 3D space. Double-click the Set Working Plane tool to set the working plane to the layer plane.
What is a work plane Comsol?
In addition to creating 3D geometries directly using 3D geometric primitives, it is also possible to form 3D geometries based on 2D sections (2D geometries) created in work planes or faces in the existing 3D geometry. A work plane is a 2D plane oriented anywhere in the 3D space.
What is lighting working plane?
(Term of lighting design) An imaginary horizontal plane situated at the nominal working height in an interior space. Most illuminance and daylight factor measurements and calculations are made for points on this plane.
How do I make a new sketch plane in Inventor?
Create work plane
- On the ribbon, click 3D Model tab Work Features panel Plane .
- Select appropriate vertices, edges, or faces to define a work plane.
- For offset work planes, drag the work plane to the appropriate location and enter a distance or angle in the Offset edit box.
- Optionally, resize the work plane.
How do you create a plane at an angle to another plane in Solidworks?
Select a surface and a sketch point on the surface. The plane is created tangent to the surface and coincident to the sketch point. Select a plane or planar face and select an edge, axis, or sketch line. Enter the angle.