How do I test my Honeywell electronic air cleaner?
- Place a single cell all the way to the rear of the air cleaner and retest.
- Now remove that cell and try it with JUST the other cell placed all the way to the rear of the air cleaner.
- If the indicator lamp GOES OUT with one of the cells installed then that cell has a short in it.
How do you open electronic air cleaner?
OPERATING YOUR ELECTRONIC AIR CLEANER Turn the On-Off switch on the power box to On. NOTE:Set the switch to 1 for On and set the switch to O for Off. The air cleaner now operates whenever your furnace/air conditioning system fan operates.
How often should you clean an electronic air filter?
The pre-filter and collection cells of an electronic air cleaner should be cleaned at least two or three times per year. Check the filter every 3 to 4 weeks. Replace your filter when necessary, or clean it if you have the reusable type. Reusable filters, should be completely dry before they are re-installed.
How do I know if my electronic air cleaner is working?
With the access door closed, turn on the Electronic Air Cleaner and the system blower fan. If neon light is on, the Electronic Air Cleaner is working.
Why is my Honeywell Air Purifier sparking?
The occasional snapping occurs when larger particles are caught by the ionizer wires. However, continuous snapping is not normal and the Electronic Air Cleaner should be cleaned. Note that the metal electronic cells may have sharp edges.
How do you clean a Honeywell electronic air cleaner cell?
Using a tub or bathtub:
- Dissolve approximately 3/4 of a cup of automatic dishwasher detergent per cell in a large plastic tub.
- Let soak for 15-20 minutes.
- Agitate up and down few times then remove.
- Be sure to use a dishwasher detergent with sodium silicates which will protect the aluminum cells.