What is the difference between 115 and 125 grinder?
All in all, 125mm angle grinders are extremely versatile tools despite their limited cutting depth of just 38 mm. While 115mm angle grinders offer a maximum cutting depth of only 30 mm, they are precise, easy to handle and lighter than larger versions.
How is a grinding disc measured?
The size of the grinding wheel is marked as dimensions in mm. For example, 230 x 3 x 22.2mm. This represents the wheel’s diameter x thickness x hole size.
What are the sizes on angle grinder discs?
The two most common disc sizes are 4.5” (115mm) and 9” (230mm). Grinders with larger discs are particularly well suited to heavy-duty applications, whereas those with smaller discs are ideal for finer work.
Can grinder cut concrete?
Although the various concrete cutting saw is available, an angle grinder is the most convenient tool for small concrete cutting work.
What is Arbor size on angle grinder?
5/8″
“The “standard” spindle (sometimes called the “arbor”) thread these days on a angle grinder in the US is 5/8-11 (5/8″ diameter and 11 threads per inch).
What is grit size in grinding wheel?
Grit size typically runs from coarse (16 -24 grit), medium (36 – 60 grit) and fine (80-120 grit). Superfine grits run from 150 and higher. Grinding wheels usually will be between 24 and 100 grit. Honing stones and jointing stones and other polishing abrasives will be 150 grit and higher.
What is Arbor size on a grinder?
“The “standard” spindle (sometimes called the “arbor”) thread these days on a angle grinder in the US is 5/8-11 (5/8″ diameter and 11 threads per inch).
Can you use a diamond blade on an angle grinder?
Diamond blades have very high resistance and cause less heat during usage. The diamond blade can absorb more heat than other blades and is perfect to use with an angle grinder.
How do you cut pavers with a grinder?
Cutting Pavers With a Circular Saw or Angle Grinder
- Mark the Cut. Mark the cutting line across the top face of the paver, using a pencil and a square or straightedge.
- Set the Saw Blade. Place the paver onto a non-slip mat atop your work surface.
- Cut on the Top Side.
- Cut on the Bottom Side.
- Break Along the Cuts.