How do I reset my Fisher Paykel dishwasher drawer?
Reset Procedures for the Fisher & Paykel Dishwasher
- Press and hold the button decorated with the key and lock image for five seconds.
- Press the power button to turn off power to the Fisher & Paykel dishwasher.
- Wait a few minutes and then press the power button to restore power.
Why is my Fisher and Paykel dishwasher not working?
Ensure the dishwasher is plugged in and the power supply is turned on at the wall. Ensure the door is firmly closed. Ensure water is connected and turned on. Check the strainer and clean if necessary, it is located where the water inlet hose screws into the tap.
Why is my Fisher and Paykel DishDrawer not draining?
Straighten any kinks along the hose that drains water from your DishDrawer™. If the kinks return, you may need to replace the hose. Clean the filter plate/drain filter. Aim to clean your DishDrawer™ at least once per month, including the drain filter plates.
Why does my Fisher and Paykel dishwasher keep beeping?
The drainage hose may be blocked or kinked, or the connection to drainage pipe may be blocked. Ensure the drainage hose and connection to pipes are not blocked. once to stop the beeping, and then again to clear the fault. to resume the wash program.
How do I reset my Fisher Paykel washing machine?
You can reset your washer to the default settings it left the factory with:
- Turn the dial to select ‘Spin’.
- Touch and hold the ‘Delay Start’ ‘More’ , the ‘Delay Start’ ‘Less’ and ‘Options’ buttons together for 3 seconds.
- Your washer will now be reset to the default settings.
Why isn’t my dishwasher heating up?
If you have your dishwasher connected to the cold water supply then it’s highly likely that a faulty heating element or thermostat are the cause of the water not heating. If you’re connecting to hot then it’s worth checking the water supply to check that there is actually an issue with the dishwasher and not elsewhere.
How do you fix a dishwasher that will not drain?
What to do if your dishwasher won’t drain
- Check for a blockage.
- Remove debris from the filter.
- Assess the drain hose.
- Check the garbage disposal.
- Clean the air gap.
- Make sure the dishwasher door latch is closed.
- Check the drain valve.
- Test the motor.
How do you clean the filter on a Fisher and Paykel dishwasher?
We recommend cleaning the filters whenever there is evidence of food particles.
- To remove the drain filter, turn the filter anti-clockwise to release, then lift out.
- Once the drain filter has been removed you can lift the filter plate out.
- Rinse them thoroughly under running water and then replace.
What is the red light on my Fisher and Paykel dishwasher?
The red ECO light will indicate the feature is on. If your dishes are heavily soiled or you require enhanced dry performance, we do not recommend ECO programmes. If the DishDrawer® is operating and a power failure occurs, it will stop. The DishDrawer® may be unable to be opened during this time.
What does F2 mean on a Fisher and Paykel dishwasher?
Motor Rotor Fault
F2. Motor Rotor Fault. There may be debris or broken glass in the Rotor. try removing and cleaning, if this doesn’t work then You will require a Service Technician to assist – Click Here to schedule a visit.