How do I set the clock on my Jensen jbr550?
- To set the clock, first turn the vehicle ignition and radio on.
- Press and hold the T/F button (10).
- Press the TUNE/TRK |<< and >>| buttons (4) to adjust the hours. “ AM” or “PM” will.
- Press the T/F button again to move the cursor to the minutes position, and then use the.
- After five seconds, normal operation will resume.
How do I adjust my Jensen radio?
Setting the clock on a Jensen radio receiver can be done in just seconds.
- Press the “Disp” button on your Jensen radio receiver to bring up the clock on the digital display.
- Press and hold the “Disp” button until the clock on the digital display begins flashing.
How do I reset my Jensen Media Player?
Press the RESET button to reset the unit back to the factory settings if abnormal operation occurs. The reset button is located on the front panel. With the unit on, press DISP to display clock time. Press and hold DISP until the hours or minutes begin to flash, then release.
How do I adjust the bass on my Jensen radio?
Use the rotary encoder to adjust the Bass level range from “-7” to “+7”. Use the rotary encoder to adjust the Treble level range from “-7” to “+7”. (full left) to “R15” (full right). rear) to “F15” (full front).
How do you change the time on a Jensen car radio?
To set the clock to display the current time, turn the vehicle ignition on and turn the radio on. Enter the system menu and adjust the clock by selecting the “Set Clock” menu item. Press the INFO/ENTER button to view the clock set screen. Press the INFO/ENTER button to move to the next digit.
Where is the reset button on a Jensen radio?
According to Jensen, resetting the stereo should fix your problem. Just to the right of the CD/DVD eject button is a small hole. If you straighten out a paper clip and push it in that hole, there’s a small reset button. Press the button and the stereo will reset itself.
How do I get my Jensen radio out of demo mode?
Press the control dial. Rotate the control dial to select DEMO OFF. Press the control dial. Press the back button twice to return to normal reception and play mode.
How do I connect my Jensen radio to Bluetooth?
If you want to use Bluetooth on your Car Audio, go to the [Settings] menu and press HOME. You can find [Bluetooth Connection] in the [Settings] menu. Choosing [Pairing] will allow you to pair. By doing this, your device will be able to be discovered by other Bluetooth devices when it is in pairing mode.
How do I set the clock on my Jensen jwm6a?
Press and hold the MODE DISPLAY button (5) for 2 seconds to enter to clock mode. Press and hold ALARM ON/OFF button (22) for 2 seconds and the clock displayed on the LCD will be flashing. Then, press the |<< button (15) to adjust the hour or press the >>| button (16) to adjust the minute.