How do I get a show all report?
How to make HPE Onboard Administrator SHOW ALL report CLI:
- Logon to the HPE Onboard Command Line Interface (CLI) via telnet or SSH. The IP-address can be found at the front of the enclosure Insight Display.
- Execute the command: SHOW ALL.
- Capture all the output from the above executed CLI command.
How do I find Virtual Connect logs?
To perform this task:
- Look for VCEM entries in Systems Insight Manager Audit Log by clicking Tasks & Logs. →View.
- Search for a VCEM operation that begins with: “Virtual Connect Enterprise Manager (VCEM) – Starting job.”
- You can find timestamp, VCEM operation (Job number#, Job details, Job title, VC Domain.
How do I find the administrator log on board?
For the OA GUI select Enclosure Information – Enclosure Settings – Configuration Scripts. Select link for “Show All”. This includes the OA system log. If the OA is a bit old then the link is “Click Here…to view inventory.
What is Virtual Connect Manager?
Virtual Connect Manager is a web console built into the firmware of Virtual Connect Ethernet modules, and is designed to configure and manage a single Virtual Connect domain, up to 64 servers.
What is HP Virtual Connect FlexFabric?
HP Virtual Connect FlexFabric-20/40 F8 Modules are the simplest, most flexible way to connect virtualized server blades to data or storage networks.
How do I log into Virtual Connect Manager?
To access the VCM CLI remotely through any SSH session:
- Using any SSH client application, start an SSH session to the VCM.
- When prompted, enter the assigned IP address or DNS name of the VCM.
- Enter a valid user name.
- Enter a valid password.
- Enter commands for the VCM.
How do I reset my HP Onboard Administrator?
Press and hold in the onboard administrator reset button for 5 seconds. To boot the system into lost password modem press L. The password appears as the system reboots. Alternatively, to reset a password on the onboard administrator, select the Insight Display (LCD panel) USBMenu option.
How do I reset my password on my Nokia c7000?
Press and hold in the HP BladeSystem Onboard Administrator reset button for 5 seconds. Select LP from the serial console prompt. Press L to boot the system into Lost Password mode. The password appears on the screen as it reboots.”