Can I put plywood over concrete floor?
If you’re installing plywood over an existing dry concrete floor, you shouldn’t have any problem. However, a new concrete floor contains a lot of moisture. So, you need to allow it to cure for at least 60 days before even bothering to check the moisture level.
Can you build a wood floor over concrete?
If you have a concrete slab main floor or basement, you may be wondering if it’s possible to install hardwood flooring directly on top of the concrete. The short answer is yes.
Do you need underlay for solid wood flooring on concrete?
It is important to mention that you do not need a wood floor underlay when you have a solid hardwood floor and that’s because it is not stable, hence it has to be installed mechanically to the concrete subfloor.
How do you attach plywood subfloor to concrete?
To install a floated subfloor system, first place a layer of plywood subfloor panels with the edges parallel to the wall. Use a ¾” spacer between the plywood and the wall and a 1/8” spacer between panels. Next, lay a second layer of plywood at a 45-degree angle to the first layer.
What do you use for subfloor on concrete?
As with a floated subfloor, NWFA recommends a vapor retarder for glue-down subfloors when installing ¾” wood flooring over concrete. After installing a vapor retarder (if necessary), cut your plywood panels into 2’x8′ or 4’x4′ sections. The NWFA recommends plywood with a minimal thickness of ¾”.
What underlayment should I use on concrete?
With a concrete subfloor, you will need an underlayment that acts as a vapor barrier in order to prevent moisture from penetrating through to your laminate installation. The normal choice is a thin foam pad material made of polyethylene or polypropylene, which rolls out in sheets.
What is the best underlay for wood flooring on concrete?
Laminate 3mm has a built in damp proof membrane so works great when laying on concrete, for example kitchens and other downstairs rooms. It also works well in upstairs rooms on wooden floor boards.