How do you reset the oil life on a 2006 Acura TSX?

How do you reset the oil life on a 2006 Acura TSX?

2006-2014 Acura TSX

1. Turn on your car without starting the engine. Get in your car and turn it all the way on and so the lights are on.
2. Display the REMAINING OIL LIFE on the screen.
3. Press and hold the SEL/RESET button.
4. Select RESET.

How do you reset the oil light on a Acura TSX?

Reset oil service light Acura TSX

1. Press and hold the TRIP/RESET button and turn ignition to (II) do not start the engine.
2. Continue to hold the TRIP/RESET button for 10 seconds until light resets.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.

How do you reset the maintenance light on a 2005 Acura TSX?

2004-2005

1. Turn the ignition switch to the OFF (0) position.
2. Press and hold the Select/Reset button(s) in the instrument panel, then turn the ignition switch to ON (II) position.
3. Hold the button(s) for 10 seconds or until the indicator resets.

What kind of oil does a 2006 Acura TSX take?

Mobil 1 Extended Performance Synthetic Motor Oil 5W-30 5 Quart.

How do you change the oil life on a Acura?

Press the SEL/RESET button on the steering wheel until the remaining engine oil life is shown. Press and hold the SEL/RESET button for at least ten seconds. Use the Up/Down buttons to select RESET, then press the SEL/RESET button to reset engine oil life.

How do you reset the wrench light on a 2006 Honda Accord?

How to Reset the Maintenance Wrench on the 2006 Honda Accord

1. Turn on the vehicle.
2. Depress the small button that is located on the dash display, a few inches from the actual wrench light.
3. With the key in place, hold down the button for about 15 seconds.
4. The screen next to the speedometer will begin to flash.

How do you reset the oil life on a 2007 Acura RDX?

How to Reset Oil Life: Acura RDX 2007-2012.

1. Turn the ignition to RUN.
2. Press the SEL/RESET button on the instrument cluster repeatedly until engine oil life is displayed.
3. Press and hold the SEL/RESET button on the steering wheel for more than 10 seconds.
4. Select RESET by pressing the INFO (up/down) button.

How do you reset the oil life on a 2009 Acura TSX?

To reset the 2009 Acura TSX maintenance light, please follow these instructions:

1. Turn the ignition to (II) (do not start the engine).
2. Press the SEL/RESET button on the steering wheel repeatedly until engine oil life is displayed.
3. Press and hold the SEL/RESET button on the steering wheel for more than 10 seconds.

How many quarts of oil does an Acura TSX take?

Capacity: Without filter 4 quartsAfter refill check oil level. With filter 4.2 quartsAfter refill check oil level.