How do you assemble a Northwest Territory tent?
Northwest Territory tents have metal poles that you connect together. There is elastic inside the poles to keep each section together as you connect them. Locate the tabs on the sides and top of the tent. Slide one pole into the first tab, feeding it through until it reaches the other side.
How do you assemble a tent?
How To Set Up a Tent Step by Step:
- Step 1: set the tent’s foundation.
- Step 2: roll out the tent atop of the foundation.
- Step 3: connect the tent poles.
- Step 4: stake in the tent.
- Step 5: attach rainfly.
- Step 6: guy out the tent.
How do you set up a tent for camping?
Lay the Base
- Gather your tent, poles, rainfly and footprint or tarp.
- Choose a spot to set up your tent — as clear, level and flat as possible.
- Remove any sticks, pine cones, stones or debris on the ground where you will set up your tent.
- Decide which way you want to orient your tent.
- Lay down the footprint or tarp.
Where do you set up a tent?
Keep away from setting up where there is washout (leaves and the dirt pattern is a good solid indicator). The tent should be placed in a position that allows water to drain away from the tent, so that you don’t have a river running through it. Set up your tent away from where you are going to be eating.
How do you set up a tent for dummies?
How do I know where to pitch my tent?
The tent should be placed in a position that allows water to drain away from the tent, so that you don’t have a river running through it. Set up your tent away from where you are going to be eating.
Which direction should I pitch my tent?
If you do have to pitch on a slope, position the tent so the door is facing downhill and/or in the same direction as the prevailing wind. This makes it less likely for rain to get in or for sudden gusts of wind to get caught inside the tent.