What size socket is 32mm?
Metric / Standard Wrench Conversion Chart
Bolt Diameter | Metric | Standard |
---|---|---|
3/4″ | 29mm | 1-1/8″ |
32mm | 1-1/4″ | |
7/8″ | 34mm | 1-5/16″ |
35mm | 1-3/8″ |
What is a 6-point socket called?
hex”
A “hex” socket—short for “hexagonal”—is a socket that fits around a hexagonal (six sided) nut or bolt head. There are two types of hex sockets – six point and twelve point. The six-point hex socket has six points (angles) inside the bolt end, making a perfectly even hexagon.
What size is a 6-point socket?
Six Point Standard Sockets (5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16)
Are 6-point sockets good?
For 6-point fasteners, a 6-point tool is your best choice. Matching up the points between the tool and fastener means that you will maximize the surface area of steel in contact, making the tool less likely to slip or fail.
What is a 30mm socket in standard?
30mm. 1.200. 11/16 Wworth; 3/4 BSF. 1.250.
What’s the difference between 6 point and 12 point sockets?
The more points a socket has, the more points of contact available. Compared with the 6-point socket, a 12-point socket has twice as many points, so it can more easily slide onto a hex nut. In other words, you would need to rotate only up to 30 degrees to fit a 12-point socket onto a hex nut.
Which socket is best 6 or 12 point?
Therefore, 6 point sockets are the clear winner, and here’s why: Six-point sockets have thicker walls than 12 point sockets. Thus, 12 point sockets often come out of the fastener due to its thinner material. On the other hand, there’s no such problem with the 6 point sockets.
Are 6 pt or 12 point sockets better?
Answer: It’s true that 12-point sockets are fine for most lightweight repairs, but heavy wrenching calls for a six-point socket. A six-point socket is much less likely to slip off a stubborn fastener or round over the corners. Here’s why: (1) Six-point sockets have thicker walls, so they’re less likely to flew.
Can I use a 12 point socket on a 6 point nut?
Compared with the 6-point socket, a 12-point socket has twice as many points, so it can more easily slide onto a hex nut. In other words, you would need to rotate only up to 30 degrees to fit a 12-point socket onto a hex nut.