How do I install Biffy?

Easy 3-Step Installation:

  1. Simply remove the toilet seat and place the Biffy on the rim of the toilet.
  2. Re-mount the toilet seat with the Biffy in place.
  3. Finish by connecting the hose to the water supply.

Can I install a bidet myself?

On the other hand, you can easily install a bidet toilet seat yourself. Bidet toilet seats are designed to be installed by anyone, no special skills needed. This type of bidet attaches directly to your existing toilet, so you don’t even need to worry about new plumbing.

How do you hook up a bidet to your toilet?

How to Hook Up a Bidet Water Line

  1. Detach the toilet’s flexible water supply hose from the base of the toilet tank.
  2. Attach the bidet T-valve to the base of the tank.
  3. Attach the water supply hose to the lower connection of the T-valve.
  4. Attach one end of the bidet’s supply hose to the upper connection of the T-valve.

How much does a plumber cost to install a bidet?

Hiring a plumber costs between $50 to $200 per hour and most bidet installations only cost around $220. If you attempt a DIY installation and end up making a mistake, the cost to fix a toilet is $230 on average.

How difficult is it to install a bidet?

Bidet toilet seats are an affordable alternative to standalone models and are designed to fit onto your existing toilet. Installing a bidet toilet seat is easier than you might think, and with a few simple tools, installation can be completed in about 30 minutes.

How do I install luxe neo 120 bidet?


  1. Remove toilet seat.
  2. Turn off water supply to toilet.
  3. Remove water supply line from toilet.
  4. Place T-valve on toilet tank.
  5. Install water supply line to T-valve.
  6. Install bidet to toilet and replace toilet seat.
  7. Install toilet seat bumpers (optional based on toilet seat type)
  8. Install water line from bidet to T-valve.

How do I remove a bidet attachment?

Uninstall Your Bidet Attachment

  1. Turn the water supply valve at the wall off completely.
  2. Flush the toilet and hold the lever down to completely empty the water tank.
  3. Disconnect the cold water hose from your Element.
  4. Remove the T-valve from between the water supply line and the toilet tank.

Categories: Blog