Can you mix widths of hardwood flooring?

If a consumer can’t decide between wide or narrow, mixed width might be a great option, such as Shaw’s Repel Hardwood Landmark collection. Narrow, wide, long or short, hardwood planks can be cut into all shapes and sizes, and in some cases even be mixed together.

How do you stagger a random floor?

The rule of thumb that professional flooring installers follow is to stagger the end joint of adjacent rows by a distance equal to 2 or 3 times the width of the plank. That makes 6 inches the most common minimum spacing for 2- and 3-inch hardwood boards, but laminate planks are typically wider than this.

How do you do a random floor pattern?

To do this, start the first row with a full plank, install the row, cut the last plank to length and save the off-cut. Cut two more fresh boards to start the next two rows, but from the fourth row on, start using the offcuts from previous rows. This randomizes the layout without creating a step pattern.

What is the best width for hardwood flooring?

Stick with thin widths for a classic wood floor: If you’re a traditionalist, planks between 2 ΒΌ inches and 3 inches are most common in homes and give you that classic hardwood floor appearance. Go wide if you love character: Wider floorboards of 5 to 12 inches reveal a wood’s character, including grain and knots.

How do you stagger engineered hardwood floors?

  1. Lay your first row of wood planks about 1/2 inch from the wall. Nail it or glue it down.
  2. Start your second row at the end of the first row.
  3. Place an end remnant at the beginning of the third row, where the second row ended.
  4. Alternate the three row patterns across the floor.

How should I arrange my hardwood floor planks?

The most common way to lay hardwood flooring is by aligning the planks parallel to the longest wall. Apart from a few exceptions like sagging joists, this is the preferred direction to lay wood floors because it aesthetically provides the best result.

Categories: Blog