Why does my CD player say CD error?
Verify that the disc is inserted correctly, with the playback side of the disc facing down in the disc tray. If the disc is dirty with fingerprints or smudges, or if the disc is scratched or broken, the player may not recognize the disc, clean the disc using a soft, dry cloth.
What does Error 1 mean on a CD player?
Error 1 means that the CD is damage or dirty. If it is jammed, you’ll just have to pull out the radio and pop the top of the deck off and dislodge the CD or depending how it is jammed, might want to fish it out with a paper clip.
How do you get a stuck CD out of a 6 CD?
Press your CD player’s power and eject buttons down at the same time, holding them for about ten seconds. If your stereo has a “force eject” feature, it should spit out the CD. If this doesn’t work, start the car and try again. Some CD players may not function when the car is turned off.
What does Error 1 mean on a Toyota CD player?
When an “Error 1” appears on the LCD screen of a CD player, the fact that the disc tray will not exit the chassis will explain the meaning behind the code. To fix an “Error 1,” lubricate a part of the CD player that controls how the tray functions.
How do you fix a car CD player error 1?
To fix an “Error 1,” lubricate a part of the CD player that controls how the tray functions….How to Fix Error 1 on a CD Player
- Unplug the CD player’s power cord from the wall outlet and remove the audio cables.
- Return the CD player to an upright position and rotate it so that the back panel is facing you.
How do you reset a CD player in a car?
Hold the power and eject buttons simultaneously Most car audio systems have a reset feature of sorts for their CD drive. Start by turning your car on, and then turning it off. With the car off, hold the stereo power button and the eject button simultaneously for at least 10 seconds.
Can a car CD player be repaired?
But most of the time a car CD player can be repaired easily with minimal fuss and hassle. Before spending a lot of money on a new unit, try these simple DIY repair tips to get your current CD player up and running again.
Why is my CD player in my car not working?
Verify the disc is inserted into the CD player properly. The disc may eject if inserted upside down. Press the RESET button on the front of the car stereo. Try a couple of different discs just to make sure there is not a problem with the disc that you are trying to play.